SUPER FIXIT WALL PUTTY is a one-component, ready-to-use, white cement-based putty enhanced with cellulose, polymer, and advanced additives. It is formulated for both exterior and interior walls, ensuring a smooth, undulation-free surface that enhances paint adhesion and durability.
SUPER FIXIT WALLO PLAST WALL PUTTY
-
General Details
-
Pack Size
-
Technical Specifications
No.
Property
Details
1
Recommended Thinner
Clean water
2
Painting Tools
Putty knives
3
Recommended Dilution
1st coat: 45% (v/w), 2nd coat: 50% (v/w)
4
Drying Time
SD: 50-60 min (weather-dependent), HD: 4-6 hrs (preferably overnight)
5
Number of Coats Required
2
6
Gloss Level
Matt finish
7
Pot Life
125 minutes
8
Flash Point
Water-based paint
9
Requirement as per HBD, Singapore
7-12 N/mm² @ 28 days
10
Shelf Life
1 Year (when sealed and stored properly)
11
Setting Time
Initial: 330 min, Final: 465 min
12
Certification
HBD Singapore
-
Precautions
- Protective Gear – Wear gloves, a mask, and safety goggles to prevent skin or eye irritation.
- Avoid Inhalation – Use in a well-ventilated area to prevent dust inhalation.
- Mixing Instructions – Always mix slowly and consistently to prevent lumps or uneven application.
- Surface Condition – Avoid applying putty on damp, loose, or contaminated surfaces for better adhesion.
- Environmental Conditions – Do not apply under extreme humidity, rain, or excessive heat.
- Waste Disposal – Dispose of unused material in accordance with local environmental guidelines.
-
Documents